The implementation process of leather batik in a leather factory

by:JIYALI     2021-05-13
JIYALI has been established for 16 years. It is a privately-owned enterprise integrating design, development, production and processing. Positioning mid-to-high-end leather OEM and ODM, the main products are men's and women's leather handbags, leather belts, leather wallets, leather handbags, suitcases, etc. Let's share with you the implementation process of leather batik by the leather factory: 1. The soaking agent is dropped into the water (the ratio is about one liter of water is about six drops of the soaking agent), and then the leather is soaked in the water to make it completely soaked. 2. Put the white wax and wood wax into the batik pot, adjust the ratio according to the season to melt.

3. After applying the dye, use a paint brush to moisten the wax, and directly brush on the skin surface where it is not dyed, or after dyeing the color and design pattern, seal the pattern with wax.

4. After the wax is dry, lightly fold the leather with your hands, or use ice cubes to place it on the wax to crack the wax, and apply a dark dye to the wax. The dark dye penetrates into the skin through the cracks of the wax, creating ice cracks. 5. Use a cotton cloth to wipe off the excess dye on the wax, let it stand for 20 minutes, wait until the dye is fixed, and then remove the wax by hand. 6. Finally put the skin into the water, and remove the remaining fine wax in the water. The above are the 6 major implementation processes of batik in a leather factory.
Custom message